BW Technologies MicroClip XT Spezifikationen PDF herunterladen (Seite 32)

GasAlertMicroClip XT

Detector Identification

The Detector Identification section provides information about the

detector, current firmware revision, and hardware revision. Data can

also be entered (25 characters per line) to display as a startup message

on the detector LCD each time it is activated.

Figure 4. Detector Identification

Serial Number

Enter the serial number of the detector. The serial number is located on

the back of the detector. The serial number is listed above the S: bar

code. This cannot be altered.

Note

GasAlertMicroClip serial numbers use either the KA1, KA2, or

KA3 serial number prefix.

GasAlertMicroClip XT serial numbers use the KA4 serial num-

ber prefix.

Hardware/Firmware Revision

Hardware/Firmware Revision cannot be altered. The field automati-

cally populates when data is retrieved from the detector. If new firmware

is downloaded to the detector, the field automatically updates when data

is retrieved.

The firmware version displays on the detector LCD during the startup

self-tests.

Startup Message

Enter text (25 characters per line) to display on the detector LCD during

startup. Enter information such as employee name, plant, area, emer-

gency numbers, etc.

Depending upon the length of the message, it will either

a) display on the LCD for 3 seconds (shorter message), or

b) scroll twice on the LCD (longer message).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

Keine Kommentare

BW Technologies MicroClip XT Spezifikationen Seite 32