BW Technologies MicroClip XT Handbuch PDF herunterladen (Seite 10)

GasAlertMicroClip

Operator’s Manual

Pushbuttons

Pushbutton Description

• To activate the detector, press C.

• To deactivate the detector, press and hold C until the OFF countdown is complete and the LCD deactivates.

• To view the TWA, STEL, and MAX (maximum) readings, press C twice. To clear the TWA, STEL, and MAX

readings, press C when the LCD displays RESET.

• To initiate calibration, deactivate the detector. Press and hold C while the detector performs the OFF

countdown. Continue holding C while the LCD briefly deactivates and then begins the CAL countdown.

Release C when the CAL countdown is complete.

• To activate the backlight while in normal operation, press C.

• To acknowledge latched alarms, press C.

• To acknowledge a low alarm and disable the audible alarm, press C (if the Low Alarm Acknowledge option

is enabled).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Keine Kommentare

BW Technologies MicroClip XT Handbuch Seite 10