BW Technologies MicroClip XT Handbuch

1, 2, 3, and 4-Gas DetectorOperator Manual

GasAlertMicroClipOperator’s Manual8PushbuttonsPushbutton DescriptionC• To activate the detector, press C.• To deactivate the detector, press and hold

GasAlertMicroClipSensor Poisons and Contaminants9Sensor Poisons and ContaminantsSeveral cleaners, solvents, and lubricants can contaminate and cause p

GasAlertMicroClipOperator’s Manual10CalibrationProcedure Display Procedure Displaya CautionCalibrate only in a safe area that is free of hazardous gas

GasAlertMicroClipAttach the Gas Cylinder to the Detector11Attach the Gas Cylinder to the Detector

GasAlertMicroClipOperator’s Manual12Bump TestGas Cylinder Connection1. Connect the calibration hose to the 0.5 l/min regulator on the gas cylinder.

GasAlertMicroClipAlarms13AlarmsRefer to the following table for information about alarms and corresponding screens. If Stealth mode is enabled, the au

GasAlertMicroClipOperator’s Manual14Alarm Display Alarm DisplaySensor Alarm• During startup Error [sensor name] displays• During normal operation Err

GasAlertMicroClipUser Options Menu15User Options MenuTo modify the user options, connect the detector to the IR Link adapter and open Fleet Manager II

GasAlertMicroClipOperator’s Manual16• Force Calibration When Overdue: When enabled, the detector automatically enters calibration during startup for o

GasAlertMicroClipMaintenance172. Connect the charging adapter to the detector IR interface.3. Charge the battery.4. Charge the battery after each work

Limited Warranty and Limitation LiabilityBW Technologies LP (BW) warrants the product to be free from defects in material and workmanship under normal

GasAlertMicroClipOperator’s Manual181. Deactivate the detector. On a clean surface, place the detector face down.2. Remove the six machine screws from

GasAlertMicroClipMaintenance19Replacing H2S, CO, and LEL sensor1. Note the placement of the PCB to ensure it is replaced correctly. Remove the two scr

GasAlertMicroClipOperator’s Manual201. Gently remove the circular rigidified flex PCB atop the sensor from the metal sensor posts. Take care not to te

GasAlertMicroClipSpecifications21XT ModelXL ModelSpecificationsInstrument dimensions: XT: 11.25 x 6.00 x 2.89 cm (4.4 x 2.4 x 1.1 in.)XL: 11.25 x 6.00

GasAlertMicroClipOperator’s Manual22Sensor type:H2S, CO, O2: Single plug-in electrochemical cellCombustibles: Plug-in catalytic beadO2 measuring princ

GasAlertMicroClipSpecifications23Year of manufacture: The detector's year of manufacture is determined from the serial number. The second and thi

GasAlertMicroClipOperator’s Manual24This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part



50120681-001 EN-C1English© BW Technologies 2015. All rights reserved.

1GasAlertMicroClipIntroductionThe operator’s manual provides basic information for the GasAlertMicroClip XT and XL. For complete operating instruction

GasAlertMicroClipOperator’s Manual2Safety Information - Read FirstUse the detector only as specified in this manual and the reference guide, otherwise

GasAlertMicroClipInformations de sécurité – À lire au préalable3performance. If an alarm occurs due to a high concentration of combustible gases, cali

GasAlertMicroClipOperator’s Manual4recommande de recharger le détecteur après chaque journée d’utilisation.• Avant toute utilisation du détecteur, rep

GasAlertMicroClipInformations de sécurité – À lire au préalable5(comme l'essence au plomb ou les hydrocarbures halogénés) peut altérer temporaire

GasAlertMicroClipOperator’s Manual6Parts of the GasAlertMicroClip8694 53710112212Item Description1 IntelliFlash2 Visual alarm indicators (LEDs)3 Allig

GasAlertMicroClipDisplay Elements7Display Elements18765432Item Description1 Alarm condition2 Automatically zero sensor3 Numeric value4 Stealth mode5 B